Husqvarna K970 SmartGuard Workshop Manual page 62

6.14.6 To assemble the retarder unit
1. Put the spring (A) in position in the guide plate (B).
Note where the spring ends must be.
B
A
2. Put the brake drum (C) in position in the center of
the guide plate.
3. Assemble the brake shoes (D) with a pair of pliers.
62 - Repair and servicing
C
D
6.14.7 To assemble the retarder and belt pulley
1. Assemble the plate of the retarder unit and the belt
pulley with the 4 screws.
2. Put the retarder unit on the bearing housing. Lock
the belt pulley with a mandrel and put the center
screw with the washer on the blade shaft.
1451 - 001 - 02.04.2020