Husqvarna K970 SmartGuard Workshop Manual page 66

6.15.2 To disassemble the wet system
1. Remove the screws that hold the spray nozzles.
2. Remove the filter with a wood screw.
3. Open the hose clip with a screwdriver.
4. Discard the hose clip.
66 - Repair and servicing
6.15.3 To assemble the wet system
1. Put the spray nozzles on to the blade guard.
2. To put the filter in the connector, push it in on a flat
surface.
3. Install new hose clips and close the hose clips with a
pair of pliers.
1451 - 001 - 02.04.2020