Husqvarna K970 SmartGuard Workshop Manual page 17

3. Loosen the center screw. Remove the air filter.
CAUTION: Make sure that dust does not fall
into the carburetor inlet.
5.2.4 To remove the cylinder cover
1. Remove the air filter. Refer to
on page 16 .
2. Remove the 2 screws and the cylinder cover.
1451 - 001 - 02.04.2020
To remove the air filter
5.2.5 To remove the carburetor
1. Remove the cylinder cover. Refer to
cylinder cover on page 17 .
2. Remove the choke handle.
3. Remove the fuel hoses
4. Remove the 2 screws for the inlet hose and
carburetor.
To remove the
Product overview for repair and
servicing - 17