Charging The Battery On A Dual Charger; Led; Autonomy Of Your Telephone - Alcatel-Lucent 8254 User Manual

Getting started

2.3.2 Charging the battery on a dual charger

Place the handset into the Dual Charger front slot facing you.
If you have a spare battery, you can charge it at the same time. Place the spare
battery pack in the back slot, charging contacts down. Push the spare battery forward
and downward under the clip to keep it on charge (A).
The AC/DC adaptor is not provided with the set. Please contact your provider for a
recommended AC/DC adaptator.
Depending on the configuration of the handset, a beep is emitted when charging
begins. The battery status icon flashes and the LED lights up. If a spare battery is on
charge, a dedicated LED on the charger lights up.
•
Green steady: the battery is fully charged.
•
Red steady: battery charging.
To remove the spare battery, push it down and backward to unclip it.
You can configure how the handset behaves when it is installed on the charger using the settings menu.
Refer to the chapter on configuring your telephone: Adjusting your telephone functions.

2.3.3 LED

•
Green steady: the battery is fully charged.
•
Red steady: battery charging.
Recharge your telephone battery regularly. The telephone can be on or off when recharging the battery. If
the telephone is to remain unused or out of its charger for several weeks, remove the battery and store it
separately.
The battery charging time is usually less than 3 hours. Charging time depends on the power source where
the cable USB is plugged (computer, AC/DC adapter, ...).
The charging time for the spare battery is usually 6 hours.

2.3.4 Autonomy of your telephone

On standby in the radio coverage zone
In continuous conversation
Switch off the telephone before changing the battery.
8AL90386ENABed01
Up to 100 hours when screensaver is activated.
Up to 200 hours without screensaver.
Up to 20 hours.
14 /76