Getting Started; Installing The Battery In The Telephone; Charging Your Telephone Battery - Alcatel-Lucent 8212 User Manual

8212 DECT Handset

1 Getting started

In order to have a fully operational 8212 DECT Handset, make sure that you have the following items:

8212 DECT Handset.

2 rechargeable NiMH batteries AAA 600mAh 1,2V.

A single charger.

1.1 Installing the battery in the telephone

1.1.1 Installing the battery in the telephone:

: Push the cover towards the back of the phone until the cover is
unclipped.

: Lift up the cover.

Use the plus ('+') and minus ('-') guides in compartment to insert the
batteries in the proper direction. Insert the minus ('-') end first and
push to place the battery.

: Replace the cover.

: Push the cover until it is clipped.
1.1.2 Removing the battery from the telephone

: Push the cover towards the back of the phone until the cover is
unclipped.

: Lift up the cover.

To remove the battery, remove the plus ('+') end first.


1.2 Charging your telephone battery

1.2.1 Charging the battery on a single charger
Put your phone on its support. Plug the USB cable into a 5V socket (AC/DC
adaptor, computer, ...).
The AC/DC adaptor is not provided with the set. Please contact your
provider for a recommended AC/DC adaptator.
You can configure how the handset behaves when it is installed on the
charger using the settings menu. Refer to the chapter on configuring your
telephone: Adjusting your telephone functions.
1.2.2
8AL90329ENAAed01
29
9 /