Table of Contents
Advertisement
Available languages
Available languages
Operation
(1)
(2)
(3)
(4)
(5)
(11)
Before getting started
• Read chapter „Safety" from page EN-4,
in particular the safety instructions.
• Set up and connect the appliance as
described in chapter „Set-up, connection
and initial start-up".
• Refill dishwasher detergents, rinse aids
and dishwasher salts or multi-tabs.
Preparation
1. Open the tap completely.
2. Close the dishwasher door.
3. Press the
button (1) to switch on the
dishwasher.
You will hear a signal tone and all
indicators will illuminate briefly.
After a short while, the programme
indicator will show (11) '
programme 'ECO'.
(6)
(12) (13)
' for
P4
Operation
(7)
(14)
(19)
(18)
Signal tones
The appliance sounds a signal tone when
buttons are pressed. This tells you that the
appliance has understood your action.
A signal tone also sounds at the end of the
programme run.
If you open the door while the programme
is on, a signal tone reminds you to close the
door again and continue the programme.
Display
The display informs you of the current status
before, during and after the programme run.
Page EN-23
(8)
(9)
(10)
(15) (16)
(17)
Advertisement
Chapters
Table of Contents
