Error indicators
Code
Solution
It takes too long for the water to fill up.
E1
• Turn the water tap on completely.
• Arrange the inlet hose properly so that it is not kinked
(see „Connecting the inlet hose" on page EN-32).
• Ensure that the water pressure is correct. See „Technical specifications" on
page EN-41.
Malfunction in the heating element.
E3
• Switch off the appliance, disconnect from the mains and inform our service
team (see page EN-39).
Water overflow.
E4
• Close tap, find leak (or have someone find it) and repair the leak
(or have it repaired).
Troubleshooting table
Page EN-37