Protecting The Environment; Selecting Programme And Starting The Programme Run; At The End Of The Programme Run - Hanseatic HG6085D137635QW User Manual

Page EN-24 Operation

Protecting the environment

– The ECO programme is the most efficient
programme for cleaning normally soiled
dishes in terms of combined energy and
water consumption.
– If you keep to the maximum specified ca-
pacity when loading your appliance and
you arrange the dishes correctly, energy
and water can be saved (see „Loading the
dishwasher" on page EN-17).
– Manual pre-rinsing of the dishes leads to
higher water and energy consumption and
is not recommended.
– Cleaning dishes in your appliance gen-
erally uses less energy and water than
washing by hand, provided you follow the
instructions in the user manual.
Selecting programme and
starting the programme run
It is recommended that you carry out a
test run before the fi rst programme run
in order to remove residues from the manu-
facturing process and in order to ensure that
the appliance functions perfectly. Carry out
this test run when the dishwasher is empty
and without any dishwasher detergent.
1. Select the suitable programme based on
the 'Programme table', see page EN-21.
2. Press the button P (2) or (3) repeatedly
until the desired programme is shown on
the display.
3. Push the button (10) to start the pro-
gramme run.
The colon on the 'Wash programme/re-
maining time' indicator (14) will flash.
At the end of the programme
run
Once the programme run has come to an end
– the door opens automatically for the steam
to escape.
– a signal tone sounds.
1. Press the button (1) to switch off the
dishwasher.
2. Turn the tap off.
3. Continue with „Unloading the dishwasher".