Page EN-38
Troubleshooting table
The dishwashing results are not satisfactory
Problem
There are residues or
streaks on the dishes.
The dishes are not
completely clean.
Possible cause
The rinse aid is incorrectly
dosed.
There is no dishwasher salt.
The dishwasher salt is clumpy.
There are food scraps which
are encrusted onto the dishes.
The dishes have not been
stacked optimally.
You have selected the incor-
rect dishwashing programme.
The dishwasher detergent is
incorrectly dosed.
The water pressure is too low.
The spraying arm can not
rotate unhindered.
The nozzles on the spraying
arm are blocked/calcified.
Solution
Adjust the dispensed dose
(see „Changing the rinse aid
dose" on page EN-15).
Add dishwasher salt
(see „Adding dishwasher salt"
on page EN-16).
Stir the dishwasher salt using
the end of a spoon or similar.
Soak dirty dishes prior to
washing the dishes.
Stack the dishes in such
a way that all parts can be
reached by the water jets
(see „Loading the dishwasher"
on page EN-17).
Select the correct dishwashing
programme (see „Programme
table" on page EN-21).
Use the correct dosage
of dishwasher detergent
(see „Programme table" on
page EN-21).
Turn the water tap on
completely.
Ensure that no dishes are
impeding the motion of the
spraying arm.
Clean the nozzles
(see „Checking and clean-
ing the spraying arms" on
page EN-29).