Dishwasher Operation; Preparation; Selecting The Dishwasher Programme; Delayed Start - Hanseatic 429300 User Manual

Fully integrated dishwasher
Hide thumbs Also See for 429300:
Table of Contents

Advertisement

Available languages

Available languages

Dishwasher operation

(1)
(13)

Preparation

Requirements:
– You have read chapter „Safety" from page
EN-6 and understand all the safety notices.
– The appliance is set up and connected as
described in chapter „Installation, connec-
tion and initial commissioning" from page
EN-23.
– Dishwasher detergent, rinse aid and dish-
washer salt and multitabs are added.
1. Open the tap completely.
2. Open the dishwasher door.
3. Press the
(8) button to switch on the
dishwasher.
You will hear a signal tone and all LEDs
will illuminate briefly. The LED (7) lights up
continuously and the display shows "
Selecting the dishwasher
programme
It is recommended that you carry out
a test run before the fi rst dishwasher
cycle in order to remove residues from
the manufacturing process and in order to
ensure that the device functions perfectly.
Carry out this test run when the dishwasher
is empty and without any dishwasher deter-
gent.
Dishwasher operation
(2)
(11)
1. Select the suitable dishwashing pro-
gramme based on the "dishwasher pro-
gramme table", see page EN-16.
2. Press the (13) button of the desired pro-
gramme.
The LED (1) of the selected programme
is illuminated, and the display (2) shows
the duration of the selected programme
(for example with the Eco programme:
3:10).
3. If you
– would like a delayed programme, please
refer below to "Delayed start".
– would like a particularly dry result, please
select the option "Extra dry" (please see
below)
– have only loaded the dishwasher half full
or with less than 6 place settings, please
select the option "Half load" (please see
– ¦ – –
".
below).
– launch it, continue with „Having the out-
let hose connected" on page EN-23.

Delayed start

The washing cycle will normally begin as
soon as the dishwasher door has been
closed.
If you want the cycle to begin later, you can
specify this. The start time can be delayed
between 1 and 24 hours.
Page EN-17
(5)
(6)
(7)
(10)
(9)
(8)

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Qp8-7714iWqp8-7714i

Table of Contents