Adding Dishwasher Salt - Hanseatic HG6085D137635QW User Manual

Page EN-16 Dishwasher detergents, rinse aids and dishwasher salts

Adding dishwasher salt

NOTICE
Risk of damage!
You may damage the dishwasher and
its stainless steel surface, its seals and
fi lters by using dishwasher salt in an im-
proper manner.
Only use regenerating salt which is
■
suitable for dishwashers.
Always wipe away split dishwasher
■
salt immediately with a damp cloth.
Immediately after adding the dish-
■
washer salt, launch a dishwashing
programme.
You do not need to add dishwasher
salt to the dishwasher salt dispenser
– if you are only using multitabs which al-
ready contain dishwasher salt,
– if the water hardness in your area is in the
0–5° dH range.
The dishwasher salt softens the water result-
ing in fewer calcification deposits on dishes.
Add dishwasher salt:
– prior to using the dishwasher for the first
time,
– when the 'Add dishwasher salt' indicator
(18) lights up.
(25)
1. Remove the lower dish rack (21).
2. Turn the cover of the dishwasher salt dis-
penser (25) in an anti-clockwise direction
and remove it.
(b)
3. Place the supplied filling funnel (b) on the
dispenser opening.
4. Add 1.5 kg of dishwasher salt.
5. Fill the dispenser with water to the rim.
This prevents the dishwasher salt from
clumping. Water may come out; this is not
a problem.
6. Stir the dishwasher salt using the end of a
spoon or similar.
7. Turn the cover of the dishwasher salt dis-
penser in a clockwise direction up to the
stop point.
8. Replace the lower dish rack.
9. Launch a dishwashing programme
straight away or carry out a test run im-
mediately upon first use using (see „Test
run" on page EN-34).