Precautions When Installing Printer Options; Installing Printer Memory - Dell 1600n Owner's Manual

Precautions When Installing Printer Options

DISCONNECTING THE POWER CORD:
Never remove the control board while the multi-function printer is plugged in.
To avoid the possibility of an electrical shock, always disconnect the power cord when
installing or removing ANY internal or external printer option.
DISCHARGE OF STATIC ELECTRICITY:
The control board and internal printer memory are sensitive to static electricity. Before
installing or removing an internal printer memory, discharge static electricity from your
body by touching something metal on any device plugged into a grounded power source. If
you walk around before finishing installation, discharge any static electricity once again.

Installing Printer Memory

Additional printer memory is provided on a Dual In-line Memory Module (DIMM).
www.dell.com.
Power the multi-function printer off and unplug all cables from the multi-function
1
printer.
To remove the control board cover, pull out gently, as shown.
2
7 6
Installing Options
NOTE: Your multifunction printer supports only Dell DIMMs. Order Dell DIMMs online at