Copying; Making Copies; Using Copy Features With The <Layout> Button - Dell 1600n Owner's Manual

Copying

NOTE: A computer connection is not required for copying.
Use the operator panel to set the paper type and size, contrast, number of copies, and image
quality.

Making Copies

Place a single document face down on the scanner glass.
1
OR
Load the document(s) to be copied face up with top edge in first into the ADF.
For details about loading original document(s), see page 36-37.
Customize the copy settings using the operator panel.
2
To...
Adjust the image quality
Select from 1 to 99 copies
Reduce or enlarge a copy
Adjust the contrast
Press <Layout> on the operator panel to use special copy features, such as Auto Fit,
3
Clone, Poster and 2 Sided copying. Refer to detail description below.
Press <Start Copy> to begin copying. The display shows the copy processing.
4
Using Copy Features With the <Layout> Button
Access the following copy features using the <Layout> button on the operator panel.
Auto Fit Copying (available via scanner glass only): Automatically reduces or enlarges the
original image to fit on the paper loaded in the multi-function printer.
Clone Copying (available via scanner glass only): Prints multiple image copies from the
original document on a single page. The number of images is automatically determined by
the original image and paper size.
NOTE: You cannot adjust the copy size using the Reduce/Enlarge button.
Press...
<Quality> and select the quality mode
from Text, Text & Photo and Photo.
<Number of Copies>.
Reduce/Enlarge.
<Contrast> and select the contrast
mode from Darker, Normal and Lighter.
Using Yo ur Multi-Function Pr inter
A
4 1