Kolida K20s User Manual page 91

K20s
Instrument settings
After choosing the rover mode for receiver, then press F button and get into the "Set Data
1)
Link" configure page, then move the select box to "WIFI Datalink" option and press power
button to confirm.
Then get into the "WIFI Config" configure page to check if the WIFI connection is already
2)
established.
Web UI settings
Login the web UI of K20s and go to "General Config" interface, then choose "WIFI" in
1)
"Datalink" option, click on "Enter" button to confirm and save the settings.
Then go to "WIFI Config" interface under "Network Config", there the option of "Client"
2)
is activated if WIFI used as datalink.
- 91 -