Kolida K20s User Manual page 82

K20s
7) Radio channels setting
Go to "Config—Device Config—Radio Config" page.
8)
In radio channel field, click on "Read" button to read the current channel value;
9)
10) Select the same radio channel value as set on base station from the list and click on
"Switch" button to apply this channel value.
Using Web UI
1) Connect KOLIDA K20s with computer via 7-pin to USB cable and set the USB port to
output as Ethernet on K20s. (a driver is required to installed on computer to enable this
- 82 -