Kolida K20s User Manual page 73

K20s
We use a formula to calculate antenna height.
"h" is the inclined height that measure from point on the ground to the measuring plate edge.
R
is the distance from middle of antenna to the edge of measuring plate.
0
h
is the distance from antenna phase center to the bottom of receiver (measuring plate).
0
H is the calculation result. We usually measure antenna height twice and adopt the average.
Attention: We input the inclined height as the antenna height, which is the inclined distance from
point on the ground to the waterproof loop of antenna.
Measuring plate
h
- 73 -