Kolida K20s User Manual page 76

K20s
Check the box of "Base" option and click "OK" and return to Instrument setting page. At
4)
this moment, KOLIDA K20S prompts the correct working mode with voice guide.
Then tap on "Work mode setting" and then check the box of "Set data link", then click on
5)
"Next" to continue;
Check the box of "Internal radio" option and click "OK" to complete the settings.
6)
Return to the main interface and again get into instrument config page, tap on "Base
7)
setting" to get into Base configuration page.
8) Choose the correction format in Msg,Type, choose the antenna measuring method and input
correct antenna height in Ant,H, input the proper value for Interval time, Mask angle and
PDOP limit.
- 76 -