Kolida K20s User Manual page 62

K20s
Power on/off
3.
a) Make sure the battery has enough power, or connect the T17 to a DC adaptor.
b) Press power button for 3~5 seconds to turn on (until the boot screen appears).
c) Press the power button for 3~5 seconds, and confirm to power off.
NOTE: If there are abnormal situations, such as the T17 cannot operate normally, use the tip of
the stylus to press the reset key to restart the T17.
Connect to PC
4.
Make sure that you‟ve installed Microsoft ActiveSync 4.5 or higher version, if your computer
equipped with win7 or win8 system, please make sure that you have installed Windows Mobile
Device Center program.
Connect the Collector to PC via the Mini USB Data Cable.
Connection will be preceded automatically by Microsoft ActiveSync.
and an interface of Setting will come out, you can just click "Cancel". After this, you can
manage and edit the data in Collector.
Installing Program
5.
Make sure that collector is synchronized with PC. Run the Installation file at PC side.
If the installation program is also suitable for collector, you can copy the installation program
into collector to install. You can just copy the folder into collector when you need.
We suggest you installing programs into Flash Memory and save data into Storage Card.
Icon will turn green
- 62 -