Advertisement
STEP #3:
WHILE THE TABLE TOP IS UPSIDE-DOWN, FASTEN AND ANGLE SUPPORTS TO THE SEAT CROSS
SUPPORTS AND THE CENTER TOP SUPPORT. USE ( 1 ) ONE 3/8" X 2 1/2" HEX HEAD LAG BOLT AND
( 1 ) ONE 3/8" FLAT WASHER PER HOLE TO SECURE.
NOTE: BE SURE TO TIGHTEN ALL LOOSE BOLTS AFTER THIS STEP IS COMPLETE.
NOTE:
LEG IS REMOVED TO SHOW DETAIL.
DO NOT REMOVE FOR THIS STEP.
www.belson.com
3/8" FLAT WASHER
3/8" X 2 1/2" HEX
HEAD LAG BOLT
Advertisement
