6.2
Place Console in Access Point Mode
Place the console in Access Point mode by pressing and holding the WiFi / Sensor button on the back
of the display for 6 seconds, until AP is flashing in the time field:
6.3
Connect to the Console's WiFi Server
Note: You may be required to disconnect your computer's ethernet cable from your router if it shares
the same IP address 192.168.1.1.
a) Example 1: Connect to the console WiFi server with a PC. Choose WiFi network
settings from Windows (or search "Change Wi-Fi Settings" from WIndows), and
Connect to the PWS- WiFi network, as shown in Figure 40 (your WiFi network name
may be slightly different, but will always begin with PWS-).
b) Example 2. Connect to the console WiFi server with a Mac. Choose the Settings icon
and Network
(your WiFi network name may be slightly different, but will always begin with PWS-).
Version 1.2
©Copyright 2019, Ambient LLC. All Rights Reserved.
Figure 39
Figure 40
. Connect to the PWS- WiFi network, as shown in Figure 41
Page 32