Temperature And Humidity Display And Settings; Temperature Units Of Measure; Outdoor Sensor Array Signal Strength; Indoor Sensor - Ambient Weather FALCON WS-8480 User Manual

If the snooze function is turned on, the 4-step crescendo alarm will sound every 2 minutes. Press and
hold the ALARM / SNOOZE button for two seconds to turn off the alarm sound. The alarm bell will
stop flashing.
5.24

Temperature and Humidity Display and Settings

5.1.5

Temperature Units of Measure

Press the °F / °C button on the front of the display to change the temperature units of measure.
5.1.6

Outdoor Sensor Array Signal Strength

The outdoor sensor array signal strength is displayed in the outdoor section of the display:
5.1.7

Indoor Sensor

5.1.7.1 Indoor Sensor Signal Strength
The indoor sensor signal strength is displayed in the indoor section of the display, next to the channel
number:
Version 1.2 ©Copyright 2019, Ambient LLC. All Rights Reserved.
Figure 15
Page 17