Pole Mounting The Sensor Array - Ambient Weather FALCON WS-8480 User Manual

communication. Please take this into consideration when choosing console or mounting
locations. Make sure your display console is at least five feet away from any electronic device
to avoid interference.
6. Visit Ambient Weather Mounting Solutions for assistance and ideas for mounting your
weather station:
http://www.ambientweather.com/amwemoso.html

3.6.2 Pole Mounting the Sensor Array

The sensor array includes an easy mounting bracket for mounting to any pole between 1" and 1.75". If
your pole diameter is greater than 1.75", consider a mast-to-mast mounting bracket and standard 1
3/8" pole available from Ambient Weather.
Mount the sensor array mounting bracket to your pole (not included) using a Philips screwdriver.
Tighten the bolts to the nuts seated inside the hexagonal bolt wells. Add the included rubber gripping
pads to the bracket.
Before completely tightening, point the wind vane to the North (solar panel to the South), as shown in
Figure 6.
Version 1.2 ©Copyright 2019, Ambient LLC. All Rights Reserved.
Figure 6
Page 10