Press ALARM / SNOOZE button to silence the alert alarm and stop the icon from flashing, or the
alarm will automatically turn off after two minutes.
5.16.4 Alert Duration
Once the alert is triggered, the alarm will sound for 2 minutes and the related alert icon and reading
will flash. The alert icon and reading will flash until the weather reading is out of the alert range.
The weather alert will sound again when the weather reading falls within the alert range again .
5.17 Backlight
The HI / LO / AUTO slide switch provides the following brightness settings:
•
HI. High intensity backlight
•
LO. Low intensity backlight
•
AUTO. Auto backlight according to ambient light level.
6. Connect your Console to Wi-Fi and the Internet
6.1 Register at Third Party Public Websites (optional):
WeatherCloud and WeatherUnderground.com are third party public websites and are another way to
share your data.
Visit Wunderground.com, and select the Join link in the upper right and corner and create a Free
Account. Once you create a free account, add a weather station.
Visit
WeatherCloud.net
and select Sign Up to create a free account and add a weather station.
6.2 Place Console in Access Point Mode
Place the console in Access Point mode by pressing and holding the Wi-Fi / Sensor button on the back
of the display for 6 seconds, until AP is flashing in the time field:
6.3 Connect to the Console's Wi-Fi Server
Note: You may be required to disconnect your computer's ethernet cable from your router if it shares
the same IP address 192.168.1.1.
a) Example 1: Connect to the console Wi-Fi server with a PC. Choose Wi-Fi network
settings from Windows (or search "Change Wi-Fi Settings" from Windows), and
Connect to the PWS- Wi-Fi network, as shown in Figure 33 (your Wi-Fi network name
may be slightly different, but will always begin with PWS-).
Version 1.0
©Copyright 2020, Ambient LLC. All Rights Reserved.
Figure 32
Page 30
Need help?
Do you have a question about the WS-7078 and is the answer not in the manual?