Alarm Settings; Turning On And Off The Alarm Feature; Setting The Alarm Time; Using The Alarm And Snooze Functions - Ambient Weather FALCON WS-8480 User Manual

5.23

Alarm Settings

5.1.2

Turning On and Off the Alarm Feature

In normal mode, press the ALARM button to show the alarm time. Press the alarm button again, and
the alarm icon will appear. Press the alarm button again, and the pre-alert icon
appear. Press the alarm button again, and the alarm and pre-alert to turn off, and no alarm will sound.
5.1.2.1 Pre-Alert Feature
The pre-alert wakes you 30 minutes earlier if ice is predicted to allow you extra time to get to work or
school.
Once the ice pre-alert is activated, the alarm will sound 30 minutes earlier if the outdoor temperature
is below -3°C (26.6 °F), where ice is likely to form.
5.1.3

Setting the Alarm Time

While in normal mode, perform the following operations to set the alarm time.
Command
[ALARM] + 2 Enter Alarm Settings
seconds Alarm Hour
[ALARM] Alarm Minute
[ALARM] Exit Alarm Settings
[ALARM] + 2 seconds means press and hold the ALARM button on the back of the display for two
seconds.
[ALARM]
5.1.4

Using the Alarm and Snooze Functions

When the alarm sounds, press and hold the ALARM / SNOOZE button for two seconds to turn off
the alarm sound. The alarm bell will stop flashing.
If no button is pressed during the alarm period, the alarm will turn off automatically after two minutes.
To temporarily silence the alarm, press the ALARM / SNOOZE button on the top of the console. The
alarm bell icon will keep flashing.
Version 1.2 ©Copyright 2019, Ambient LLC. All Rights Reserved.
Figure 12
Figure 13
Mode
means press but do not hold the ALARM button on the back of the display.
Figure 14
Settings
Press [UP] to increase, [DOWN] to decrease.
Press [UP] to increase, [DOWN] to decrease.
will
Page 16