Work Modes - Salus BTRP230V Full User Manual

4. Work modes

BTRP230V(50) offers a few work modes. Frame on a given icon indicates which mode is currently active. In manual mode
level is maintained. Thermostat follows programmed schedule when AUTO mode is active („A" icon). Detailed description of work modes is located below:
- Frame - means that the work mode is active (the icon of the work mode must be in the center of the frame). For example:
- means that comfort temperature mode is active
- means that comfort temperature mode is inactive
- Comfort temperature mode - pre-defined setpoint temperature. Usually set when we are indoors. The highest maintained temperature in
heating mode or the lowest if thermostat works in the cooling system. Acting alone works as a manual mode. Temperature range: from 5°C to 35°C.
- Economic temperature mode - pre-defined setpoint temperature. Usually set at night or when we are out of the house. Acting alone works as a
manual mode. Temperature range: from 5°C to 35°C.
- Automatic mode temperature (schedule) - follows programmed schedule. Schedule can be temporarily override with new setpoint
temperature (temporary override mode will be active to the next change forced by schedule,
- Party mode - this mode sets the comfort temperature
- Holiday mode - this mode sets the frost protection mode
- Frost protection mode - usually used during extended periods of absence or during the holidays (only available in heating mode). Temperature
range: from 5°C to 17°C.
18
Example - comfort temperature mode setpoint editing:
1
Use or buttons to switch
between work modes. Choose
in this case.
3
Confirm by button.
for a user-defined time (maximum 9 hours 50 minutes).
for a user-defined time (maximum 99 days).
2
Use
temperature setpoint.
4
Thermostat will go back to the main
screen after saving the settings.
or
hand icon will be displayed).
or buttons set
3
only one temperature