Nfc Module - HP EliteBook 835 G8 Maintenance And Service Manual

5. Remove the touchpad from the computer (5).
Reverse this procedure to install the touchpad.

NFC module

To remove the NFC module, use this procedure and illustration.
Table 6-9 NFC module description and part number
Description
NFC module
NFC module cable (included in Cable Kit)
Before removing the NFC module, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the NFC module:
1. Disconnect the system board cable from the ZIF connector on the NFC module (1).
2. Disconnect the touchpad cable from the reverse ZIF connector on the NFC module (2).
Preparation for disassembly on page
Bottom cover on page
Battery on page 42).
32).
Component replacement procedures
Spare part number
M07214-001
M08526-001
32).
51