Fingerprint Reader Cable; Nfc Module Cable - HP EliteBook 1040 Maintenance And Service Manual

To install the fingerprint reader, reverse this procedure.

Fingerprint reader cable

To remove the fingerprint reader cable, use this procedure and illustration.
NOTE: The fingerprint reader cable is included in the Cable Kit, spare part number N09040-001.
Before removing the fingerprint reader cable, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the right speaker (see
5. Remove the fingerprint reader (see
Remove the fingerprint reader cable:
■
Release the ZIF connector (1) the fingerprint reader cable is connected to, and then disconnect the
fingerprint reader cable (2) from the fingerprint reader.
To install the fingerprint reader cable, reverse this procedure.

NFC module cable

To remove the NFC module cable, use this procedure and illustration.
NOTE: The NFC module cable is included in the Cable Kit, spare part number N09040-001.
Before removing the NFC module cable, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the NFC module cable:
1. Release the ZIF connector (1) the NFC module cable is connected to, and then disconnect the NFC
module cable from the system board.
Preparation for disassembly on page
Bottom cover on page
Battery on page 40).
Speakers on page
Fingerprint reader on page
Preparation for disassembly on page
Bottom cover on page
Battery on page 40).
38).
45).
61).
38).
Fingerprint reader cable
38).
38).
63