Nfc Module - HP ZBook Power G10 Maintenance And Service Manual

6. Remove the card reader board (2).
To install the card reader board, reverse this procedure.

NFC module

To remove the NFC module, use this procedure and illustration.
Table 5-8 NFC module description and part number
Description
NFC module
NFC module cable
NFC antenna
Before removing the NFC module, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the NFC module:
1. Disconnect the system board cable from the ZIF connector (1) on the NFC module.
2. Disconnect the NFC antenna cable from the ZIF connector (2) on the NFC module.
48 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page 39).
37).
Spare part number
L02249-001
N56092-001
N06908-001
37).