Nfc Module - HP ZHAN X 13 G2 Maintenance And Service Manual

NFC module

Table 6-3 NFC module description and part number
Description
NFC module (includes cables)
Before removing the NFC module, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the NFC module:
1. Disconnect the touchpad cable from the ZIF connector on the NFC module (1).
2. Disconnect the card reader board cable from the ZIF connector on the NFC module (2).
3. Remove the NFC module from the computer (3).
Reverse this procedure to install the NFC module.
(Preparation for disassembly on page
Bottom cover on page
Battery on page 30).
37).
28).
Component replacement procedures
Spare part number
L56453-001
41