Keyboard With Top Cover - HP EliteBook 835 G8 Maintenance And Service Manual

22. If you need to remove the second ambient light sensor cables, disconnect the cable from the ZIF
connectors on the second ambient light sensor (1) and hub board (2), and then peel the cables off the
inside of the display back cover to remove them (3).
The second ambient light sensor cable is available in the Cable Kit as spare part number M08526-001.
Display back covers are available as the following spare part numbers:
M36394-001: Models with WWAN, 250 nits, Touch-on Panel (TOP)
M36395-001: Models with WWAN, 400 nits
M36392-001: Models without WWAN, 250 nits, Touch-on Panel (TOP)
M36393-001: Models without WWAN, privacy
M44336-001: Models with WWAN, 1000 nits
Reverse this procedure to reassemble and replace the display assembly.

Keyboard with top cover

The top cover with keyboard remains after removing all other spare parts from the computer. In this section,
the first table provides the main spare part number for the top cover/keyboards. The second table provides
the country codes.
Table 6-13 Keyboard with top cover descriptions and part numbers
Description
Keyboard with top cover, backlit
Keyboard with top cover, not backlit
Keyboard with top cover, backlit, for use in privacy models
Spare part number
M53846-xx1
M53848-xx1
M53847-xx1
Component replacement procedures 73