Card Reader Board - HP EliteBook 835 G8 Maintenance And Service Manual

4. Remove the speakers from the computer (4) .
Reverse this procedure to install the speakers.

Card reader board

To remove the card reader board, use this procedure and illustration.
Table 6-4 Card reader board description and part number
Description
Card reader board
Card reader board cable (included in Cable Kit)
Before removing the card reader board, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the left speaker (see
Remove the card reader board:
1. Disconnect the cable from the reverse ZIF connector on the card reader board (1).
2. Remove the three Phillips M2.0 × 2.0 screws (2) that secure the board to the computer.
46 Chapter 6 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page 42).
Speakers on page 45).
32).
Spare part number
M08551-001
M08526-001
32).