Power Connector Cable - HP EliteBook 835 G8 Maintenance And Service Manual

Table of Contents

Advertisement

3.
Remove the board from the computer (3).
Reverse this procedure to install the card reader board.

Power connector cable

To remove the power connector cable, use this procedure and illustration.
Table 6-5
Power connector cable description and part number
Description
Power connector cable
Before removing the power connector cable, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
Remove the power connector cable:
1.
Disconnect the cable from the system board (1), and then remove the cable from the clip.
2.
Remove the Phillips M2.0 × 4.0 screw (2) that secures the power connector cable to the computer.
Preparation for disassembly on page
Bottom cover on page
32).
32).
Battery on page
42).
Component replacement procedures
Spare part number
M15626-001
47

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents