3.
Use a tool to release the module (3), and then remove the module from the computer (4). The module is
secured with adhesive.
Reverse this procedure to install the NFC module.
Fan
To remove the fan, use this procedure and illustration.
Table 6-10
Fan description and part number
Description
Fan assembly
Before removing the fan, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
Remove the fan assembly:
1.
Disconnect the fan cable from the system board (1).
2.
Remove the cables from the clips on the side of the fan (2).
52
Chapter 6 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
32).
32).
Battery on page
42).
Spare part number
M44335-001