Quick BTR185 Series Installation And Use Manual page 31

4 - Installation
Fig. 4
Fig. 5
F
Laminating system
recommended by Quick
COUNTER FLANGE
GRP LAYERS
• Align the counter flange to the hull's opening and check that the two heights (X) are correct. Resinate the counter flange, or
solder it in case of aluminium or steel, according to the techniques the most suitable to the hull's material (fig. 5).
Fig. 6
• Make a solid coaming for the closing lid on the whole perimeter of the hull's opening (fig. 6).
.
®
GRP LAYERS
HULL
BTR185 INSTALLATION AND USE MANUAL - REV009A
• Cut the hull along the cutting area previously marked
(fig. 4).
GRP LAYERS
COUNTER FLANGE
HULL
BTR185
EN
GRP LAYERS
STRUCTURAL ADHESIVE
LID
31