PS/2 Keyboard/Mouse Connector
PS/2 KB/MS
2
10
1
9
The Keyboard/Mouse connector is used to connect PS/2 keyboard and PS/2 mouse by means
of a PS/2 cable. Connect one end of the cable to the Keyboard/Mouse connector. The other
ends are used to connect a PS/2 keyboard and a PS/2 mouse.
PS/2 mouse port
PS/2 keyboard port
Chapter 5 Ports and Connectors
Connect to the board's Keyboard/Mouse
connector
Chapter 5
Wake-On-PS/2 Keyboard/Mouse
The Wake-On-PS/2 Keyboard/Mouse function allows you to use the PS/2 keyboard or PS/2
mouse to power-on the system. To use this function:
•
Jumper Setting
JP3 must be set to "2-3 On: 5V_standby". Refer to "PS/2 Keyboard/Mouse Power Select"
in chapter 4 for more information.
Important:
The 5V_standby power source of your power supply must support ≥720mA.
39
www.dfi .com