Auto Power-On Select; Ps/2 Keyboard/Mouse Power Select - DFI EC510 User Manual

Auto Power-on Select

JP7 is used to select the method of powering on the system. If you want the system to pow-
er-on whenever AC power comes in, set JP7 pins 2 and 3 to On. If you want to use the power
button, set pins 1 and 2 to On.
When using the JP7 "Power On" feature to power the system back on after a power failure
occurs, the system may not power on if the power lost is resumed within 5 seconds (power
flicker).
Chapter 4 Jumper Settings
Chapter 4
3
2
1
JP7
1-2 On:
Power-on via power button
(default)
3
2
1
2-3 On:
Power-on via AC power
25

PS/2 Keyboard/Mouse Power Select

3
2
1
1-2 On: +5V
(default)
JP3
JP3 is used to select the power of the PS/2 keyboard/mouse port. Selecting +5V_standby will
allow you to use the PS/2 keyboard or PS/2 mouse to wake up the system.
Important:
The +5V_standby power source of your power supply must support ≥720mA.
3
2
1
2-3 On:
+5V_standby
www.dfi .com