Chapter 3 - Installing The Devices; Removing The Chassis Cover - DFI EC510 User Manual

Chapter 3 - Installing the Devices

Removing the Chassis Cover

1. Make sure the system and all other peripheral devices connected to it have been powered-off.
2. Disconnect all power cords and cables.
3. The 6 mounting screws on the left side, right side and the bottom of the system are used to
secure the cover to the chassis. Remove these screws and then put them in a safe place for
later use.
Mounting Screw
Mounting Screw
Chapter 3 Installing the Devices
Chapter 3
Mounting Screw
13
4. After removing these mounting screws, lift the cover upward.
Lift the Cover Upward
5. The SODIMM sockets, Mini PCIe slot and SATA drive bay are readily accessible after remov-
ing the chassis cover.
SATA drive bay
Mini PCIe slot
SODIMM socket
www.dfi .com