Fiber Optic Ethernet Port Specifications; Operating Environment; Mechanical Specifications - Siemens RUGGEDCOM RSG908C Installation Manual

Standard
62439-2:2016
62439-3:2016
5.4

Fiber Optic Ethernet Port Specifications

The following details the specifications for fiber Ethernet ports that can be ordered
with the RUGGEDCOM RSG908C.
Note
•
•
5.5

Operating Environment

The RUGGEDCOM RSG908C is rated to operate under the following environmental
conditions.
Ambient Operating Tempera-
ture
Ambient Storage Temperature
Ambient Relative Humidity
Maximum Altitude
a
Measured from a 30 cm (12 in) radius surrounding the center of the enclosure.
b
Operating temperature may vary based on the limitations of installed SFPs. Refer to the RUGGEDCOM
SFP Transceivers Catalog for SFP temperature ratings.
c
Non-condensing.
5.6

Mechanical Specifications

Weight
Ingress Protection
Enclosure
RUGGEDCOM RSG908C
Installation Manual, 02/2020, C79000-G8976-1404-06
10 Mbps Ports
IEC
IEC
ü
All optical power numbers are listed as dBm averages. To convert from average
to peak, add 3 dBm. To convert from peak to average, subtract 3 dBm.
Maximum segment length is greatly dependent on factors such as fiber quality,
and the number of patches and splices. Consult a Siemens sales associate when
determining maximum segment distances.
a b
c
5.4 Fiber Optic Ethernet Port Specifications
100 Mbps 1000 Mbps
Ports Ports
ü ü
ü ü
-40 to 85 °C (-40 to 185 °F)
-40 to 85 °C (-40 to 185 °F)
5% to 95%
2000 m (6562 ft)
2.4 kg (5.3 lbs)
IP40
Die Cast Aluminum
Technical Specifications
Description
Media Redundancy Protocol
(MRP)
High-Availability Seamless Re-
dundancy (HSR), Parallel Redun-
dancy Protocol (PRP)
25