Functions And Settings; Operation; Basic - ProLights SUNBAR2500MAX User Manual

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

Connect the supplied main cable to a socket (100-240V~/50-60Hz). The unit will run built-in program to
reset all motors to their home position. Shortly after that the SUNBAR2500MAX is ready for operation.
To switch off, disconnect the mains plug from the socket. For a more convenient operation it is recom-
mended to connect the unit to a socket which can be switched on and off via light switch.

3.2 BASIC

The control panel of SUNBAR2500MAX has a display and 4 buttons for the complete programming and
management of the projector menu (fig.4).
UP
Increases the value
displayed or passes to
the previous item in a
menu
CONNECT
SUNBAR2500MAX
DOWN
Decreases the value
displayed or passes to
the next item in the
menu
SETUP ADVANCED
MENU
To enter in the main
menù or to return to the
top level
INFORMATION
Fig.4 - Functions of the buttons and display icons
ENTER
Confirms the displayed
value, or activates the
displayed function, or
enters the successive
menu
STAND ALONE
7