Scan; Turning Scan On Or Off; Making A Dynamic Priority Change (Conventional Scan Only); Deleting A Nuisance Channel - Motorola APX 7000 User Manual

6875945M01-NL
Advanced Features
2.5

Scan

This feature allows you to monitor traffic on different channels by scanning a preprogrammed list of
channels.
2.5.1

Turning Scan On or Off

Procedure:
Perform one of the following actions.
• Press the preprogrammed Scan button to toggle Scan On or Scan Off to initiate or stop
scan.
• Turn the preprogrammed Scan switch to the Scan on or Scan off position to initiate or stop
scan.
• or to Scan and press the Menu Select button directly below Scan.
If the scan is enabled, the display shows Scan on and the scan status icon.
If the scan is disabled, the display shows Scan Off.
The radio returns to the Home screen.
2.5.2

Making a Dynamic Priority Change (Conventional Scan Only)

When and where to use:
While the radio is scanning, the dynamic priority change feature allows you to temporarily change any
channel in a scan list (except for the Priority-One channel) to the Priority-Two channel.
This change remains in effect until scan is turned off. Scan then reverts to the default setting.
Procedure:
• Making a Dynamic Priority Change using the preprogrammed Dynamic Priority button:
a. When the radio locks onto the channel designated as the new Priority-Two channel, press
the preprogrammed Dynamic Priority button.
The radio continues scanning the remaining channels in the list.
2.5.3

Deleting a Nuisance Channel

When and where to use:
If a channel continually generates unwanted calls or noise (termed "nuisance" channel), you can
temporarily remove the unwanted channel from the scan list.
This capability does not apply to priority channels or the designated transmit channel.
Procedure:
When the radio is locked onto the channel to be deleted, perform one of the following actions:
• Press the preprogrammed Nuisance Delete button.
78