2.27.18.1
Enabling Transmit Inhibition
Procedure:
1 Perform one of the following actions.
•
Switch the preprogrammed Transmit Inhibit switch to Transmit Inhibit enabled.
•
or to TxIn. Press the Menu Select button below TxIn.
•
Press the Transmit Inhibit programmable button.
NOTICE: If the user has disabled TX Inhibit using the menu and then moves the switch
to the position where TX Inhibit is enabled, the new value overwrites the menu value.
The display shows Tx inhibit on. You hear a sequence of short, low-high tones to indicate
transmission is inhibited.
Pressing PTT triggers the radio sounds a constant short, low-pitched tone (reject tone).
NOTICE: The status of the Transmit Inhibit does not change after the radio powers up.
2.27.18.2
Disabling Transmit Inhibition
Procedure:
1 Perform one of the following actions.
•
Switch the preprogrammed Transmit Inhibit switch to Transmit Inhibit disabled position.
•
or to TxIn. Press the Menu Select button below TxIn.
•
Press the Transmit Inhibit programmable button.
NOTICE: If the user has disabled TX Inhibit using the softkey and then moves the switch
to the position where TX Inhibit is enabled, the new value overwrites the menu value.
The display shows Tx inhibit off. You hear a sequence of short, high-low tone (Transmit
Inhibit Off tone) to indicate transmission is back to normal operation.
2.27.19
Instant Recall
This feature allows the user to save the last received call and playback the recorded call.
The feature buffers all incoming audio over the air and stored when the audio is saved.
2.27.19.1
Saving and Playback Calls
When and where to use:
Perform one of the following to save and playback the recorded calls. You can use the options
interchangeably depending on your preference and the programmed functions.
Procedure:
•
Playback and saving the recorded calls using the radio menu:
a. Press the Menu Select button directly below Rcnt.
6875945M01-NL
Advanced Features
159