Editing The Soft Id; Front Panel Programming; Entering The Front Panel Programming Mode - Motorola APX 7000 User Manual

6875945M01-NL
Advanced Features
2.27.21.4

Editing the Soft ID

Prerequisites: Your radio must be preprogrammed to allow you to use this feature.
When and where to use: This feature allows you to change your username.
Procedure:
1 Perform one of the following actions.
• Press the preprogrammed Info button.
• or to Info and press the Menu Select button directly below Info.
2 or to Soft ID and press the Menu Select button directly below Sel.
The display shows the current Soft ID.
3 Perform one of the following actions.
• Press the Menu Select button directly below Edit to edit the current Soft ID.
• Press the Menu Select button directly below Back to return to the previous screen.
A blinking cursor appears in the Edit Soft ID screen.
4 Use the keypad to edit the text.
5 Perform one of the following actions.
• Press the Menu Select button directly below Ok to save the new Soft ID and return to the
previous screen.
• Press the Menu Select button directly below Cncl to return to the previous screen.
2.27.22

Front Panel Programming

You are able to customize certain feature parameters in Front Panel Programming (FPP) to enhance
the use of your radio.
2.27.22.1

Entering the Front Panel Programming Mode

You can follow this procedure to enter the front panel programming (FPP) mode on your radio.
2.27.22.1.1
Federal
Procedure:
1 Press or to FPP and press the Menu Select button directly below FPP.
The radio displays the Enter password screen.
2 Perform one of the following actions and proceed to the next step:
• Press the Menu Select button directly below Ok.
• Enter the password and press the Menu Select button directly below Ok.
If the password is not entered, the radio displays the non-password protected zones only.
3 Press or to select Zn/Ch.
164