Sending Ssa Notification To Single Site By Manual Entry - Motorola APX 7000 User Manual

6875945M01-NL
Advanced Features
2 Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
3 or to Start Alert and press the Menu Select button directly below Sel.
The display shows the Select Site screen.
4 or to the desired Site Alias. Press the Menu Select button directly below Sel.
The display shows the Select Alert screen.
5 or to select the desired Alert Alias and press the Menu Select button directly below Send.
The display shows Sending req.
If radio is out of range, roaming to a foreign system or in a failsoft situation, the display shows
Req failed.
If the request is successful, the display shows Req successful.
If the site is not available, the display shows <Site Alias> not available.
If the site does not exist, the display shows <Site Alias> does not exist.
6 To return to the Home screen, press the Menu Select button directly below Exit.
If you are at the site designated to receive this alert, you can hear an alert tone repeated periodically.
The display shows the <Alert Alias> with the intelligent lighting at Home screen.
2.25.2

Sending SSA Notification to Single Site by Manual Entry

Procedure:
1 or to SSA.
2 Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
3 or to Start Alert and press the Menu Select button directly below Sel.
The display shows the Select Site screen.
4 or to [SiteID Entry] to send alert through the manual entry. Press the Menu Select
button directly below Edit.
The display shows the Enter SiteID screen.
5 Key in the desired Site ID and press the Menu Select button directly below Ok.
If a correct Site ID is entered, the display shows the Select Alert screen.
If a wrong Site ID is entered, the display shows Invalid ID and prompts to enter the Site ID
again.
6 or to select the desired Alert Alias and press the Menu Select button directly below Send.
The display shows Sending req.
If radio is out of range, roaming to a foreign system or in a failsoft situation, the display shows
Req failed.
If the request is successful, the display shows Req successful.
If the site is not available, the display shows <Site ID> not available.
142