Removing And Attaching The Accessory Connector Cover - Motorola APX 7000 User Manual

Dual display
Hide thumbs Also See for APX 7000:
Table of Contents

Advertisement

3 To remove the antenna, turn the antenna counterclockwise.
NOTICE: When removing the antenna, ensure that the radio is turned off.

Removing and Attaching the Accessory Connector Cover

When and where to use: The accessory connector is on the antenna side of the radio. It is used to
connect accessories to the radio.
NOTICE: To prevent damage to the connector, shield it with the connector cover when not in
use.
Procedure:
1 To remove the accessory connector cover, rotate the thumbscrew
disengages from the radio.
NOTICE: If the thumbscrew is too tight, use an Allen wrench at
A
B
C
2 Rotate and lift the connector cover to disengage it from the radio.
3 To attach the accessory connector cover, insert the hooked end
above the connector.
4 Press the top of the cover downward to seat it in the slot.
5 Once in place, tighten by rotating the thumbscrew
Preparing Your Radio for Use
counterclockwise until it
to loosen it first.
of the cover into the slot
clockwise by hand.
6875945M01-NL
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Apx 7000l

Table of Contents