Testing The Man Down Feature; Automatic Registration Service (Ars); Selecting Or Changing The Ars Mode - Motorola APX 7000 User Manual

6875945M01-NL
Advanced Features
2.11.8

Testing the Man Down Feature

Prerequisites: Enable the Emergency feature with Silent Alarm disabled, but not in Surveillance Mode
before running this test on the radio.
Procedure:
1 Turn the radio on and place in the vertical position, for at least 5 seconds.
2 Lay the radio down in the horizontal position.
3 Wait for alert tone.
One of the following scenarios occurs:
• The radio alerts with audible tone and displays Man-Down.
• If no tone is heard, make sure that the Man Down feature is enabled on your radio. If Man Down
feature was not enabled, please enable it and repeat
• If the Man Down feature is enabled and no tone is heard, send the radio to a qualified technician.
2.12

Automatic Registration Service (ARS)

This feature provides an automated data application registration for the radio. When you turn on the
radio, the device automatically registers with the server. Data applications within the fixed network
determine the presence of a device on the system and send data to the device.
The ARS for the radio consists of two modes:
• ARS Server Mode (default mode)
• ARS Non-server Mode
2.12.1

Selecting or Changing the ARS Mode

When and where to use:
The following methods are options on how to select or change the ARS Mode. The result of all the
methods is the same. You can use the options interchangeably depending on your preference and the
programmed functions.
Procedure:
• Selecting or Changing the ARS mode using the 16-Position Select knob:
a. Once the zone you want is displayed, turn the preprogrammed 16-Position Select knob to
the desired mode.
• Selecting or Changing the ARS mode using the radio menu:
a. or to Chan .
b. Press the Menu Select button directly below Chan .
The display shows the current channel name.
c. or to the required channel or mode.
One of the following scenarios occur:
• In ARS Server Mode, the display shows the zone and ARS server channel.
• In ARS Non-Server Mode, the display shows the zone and ARS non-server channel.
92
step 1 to step 3.