2.11.5
Radio Alerts When Man Down Enhanced is Triggered
NOTICE: This feature is to be preprogrammed specifically to a zone and channel which
supports Emergency feature.
The volume and repetition duration of Man Down Enhanced alert tone could be customized and
preprogrammed to suite the required situation.
Consult your agent or qualified technician for more details.
When the radio initiates Man Down Enhanced, you hear the Critical Man Down Continuous alert tone
from the radio speaker. The volume of this tone is set to the louder of the preprogrammed minimum
level or the current radio speaker level. This acts as a beacon to find the radio.
NOTICE: If the radio is programmed with Silent Emergency, the radio inhibits the alert tone and
visual alert associated with the emergency feature.
If the radio is programmed in Surveillance Mode, the alert tone can be heard from the radio
speaker.
Once the alert tone is active, changing to another channel with different setup triggers a different
response from the radio as described next.
•
The alert tone is inhibited when you change to a channel without Emergency feature.
•
The alert tone is inhibited when you change to a channel with Emergency but no Man Down
feature.
•
The current alert tone is inhibited and is replaced with a different alert tone when you change to a
channel with Emergency and different Man Down configuration.
•
The alert tone continues when you change to a channel with Emergency and similar Man Down
configuration.
2.11.6
Exiting Man Down Feature
When and where to use: If you are not in a real Man Down situation, you should exit the Man Down
feature and prevent emergency from going off with the following operation.
Procedure:
Perform one of the following actions:
•
Repositioning the radio or shaking the radio (when motion sensitivity is enabled).
•
Press the preprogrammed Man Down Clear button to exit.
•
Press the Menu Select button below Clr to exit.
2.11.7
Re-Initiating Man Down
Prerequisites: After exiting the Emergency Operation when the radio is still in Man Down condition
(tilted achieving threshold angle or motionless), user must first exit Man Down condition to then
reinitiate the Man Down feature.
Procedure:
Return the radio to the vertical position or shake the radio (when motion sensitivity is enabled).
6875945M01-NL
Advanced Features
91