Monitoring A Channel; Monitoring Conventional Mode - Motorola APX 7000 User Manual

1.8.1

Monitoring a Channel

When and where to use: Do one of the followings to monitor a channel. You can use these options
interchangeably depending on your preference and the programmed functions.
Procedure:
• Monitoring a Channel with Volume Set button.
a. Select the desired zone and channel.
b. Press and hold the Volume Set button to hear the volume set tone.
c. Adjust the Volume Control Knob if necessary.
d. Release the Volume Set button.
e. Press and hold the PTT button to transmit.
The LED lights up solid red.
f. Release the PTT button to receive (listen).
• Monitoring a Channel with Monitor button.
a. Press the preprogrammed Monitor button.
b. Adjust the Volume Control Knob if necessary.
c. Press and hold the PTT button to transmit.
The LED lights up solid red.
d. Release the PTT button to receive (listen).
The Carrier Squelch indicator appears on the display when you monitor a channel using the
preprogrammed Monitor button.
• Monitoring a Channel using the selected zone channel.
a. Select the desired zone and channel.
b. Listen for a transmission.
c. Adjust the Volume Control Knob if necessary.
d. Press and hold the PTT button to transmit.
The LED lights up solid red.
e. Release the PTT button to receive (listen).
1.8.2

Monitoring Conventional Mode

When and where to use:
Your radio may be preprogrammed to receive Private-Line
Procedure:
1 Momentarily press the Monitor button to listen for activity.
The Carrier Squelch indicator appears on the display.
2 Press and hold the Monitor button to set continuous monitor operation.
The duration of the button press is programmable.
General Radio Operation
®
(PL) calls.
6875945M01-NL
61