Changing Settings - Miele H 2265-1 B Operating And Installation Instructions

Clock/timer

Changing settings

Default settings are set in the oven con-
trols at the factory (see "Settings over-
view").
You change a setting  by changing its
status .
 Turn the function selector to 0.
 Press the  sensor control un-
til   appears:

 If you want to change another setting,
press the  or  sensor control re-
peatedly until the relevant number
appears.
 Confirm with OK.

The setting is applied and the current
status  appears, e.g. 
48


To change the status:
 Press the  or  sensor control re-
peatedly until the status you want is
shown.
 Confirm with OK.
The selected status is now saved and
the setting  appears again.
To change further settings, proceed in
the same way.
If you do not want to change further
settings:
 Wait approx. 15 seconds until the
time of day appears.
The settings are retained in the event
of an interruption to the power supply.