Table of Contents
Advertisement
The wine conditioning unit is supplied
right-hand hinged. If left-hand hinging is
required, the hinges must be changed.
To change the door hinging, you will
need the following tools:
The glass door is very heavy (approx.
30 kg) and could break.
Two people are needed for changing
the door hinging.
Place a suitable cover on the floor in
front of the appliance to protect the
appliance door and your floor from
damage.
Be careful not to damage the door
seal. If the door seal is damaged, the
appliance door may not close prop-
erly and cooling will be insufficient.
Changing the door hinging
Open the appliance door as far as it
will go.
Use a flat-blade screwdriver to care-
fully remove cover at the bottom of
the appliance.
Place red safety device (supplied
with the appliance) onto soft-close
mechanism and click it into posi-
tion.
The safety device prevents the hinge
from snapping shut. Do not remove the
safety device until instructed to do so.
Push pin up and out from under-
neath.
The soft-close mechanism is no longer
fixed to the appliance.
57
Advertisement
Table of Contents
