Table of Contents
Advertisement
Installation
Aligning the appliance doors
The appliance door(s) can be height-ad-
justed at the lower hinge plates.
Unscrew the set screw a maximum
of one turn using the Allen key
supplied.
Adjust the height of the hinge pin with
the spanner supplied. The appli-
ance is delivered with the hinge pin
fully screwed in.
– To raise the door: turn it clockwise.
– To lower the door: turn it anti-clock-
wise.
Tighten the set screw . The hinge
pin is fastened again.
96
Changing the door hinging
The refrigeration appliance is supplied
with left-hand hinging. If right-hand
hinging is required, the hinges can be
changed.
Do not change the hinging if this refri-
geration appliance is going to be in-
stalled side-by-side with another refri-
geration appliance.
Danger of injury and damage
when changing the door hinging.
There is an increased danger of in-
jury and damage if the refrigeration
appliance is installed by a single per-
son.
Always change the door hinging with
the help of a second person.
If the door seal is damaged or has
slipped out of its groove, the appli-
ance door may not close properly
and cooling performance will be re-
duced. Condensate will build up in
the interior cabinet and this can
cause a build-up of ice.
Do not damage the door seal and
ensure it does not slip out of its
groove.
Advertisement
Table of Contents
